how hard is the journeyman plumber test

How Hard is The Journeyman Plumber Test? Here’s The Truth!

When you’re pursuing a career as a plumber, that you’ve probably already heard in the Journeyman Plumber Exam. Although taking the test is not required in many jurisdictions, it is typically a recommended step before deciding on your professional route. It just serves as a first step toward becoming a qualified or licensed plumber. How Hard is The Journeyman Plumber Test?

Your considerable knowledge and abilities will be put to the test in the exam. You may learn every important thing regarding the Journeyman Plumber Examination on this page. Additionally, we’ll give you a thorough evaluation of the challenging level.

What is the Journeyman Plumber Test?

The capacity of a person to operate as a qualified or licensed plumber on the journeyman degree within a given state is assessed using a set of state-specific examinations known as the Journeyman Plumber Examinations.

These tests are intended to evaluate a person’s knowledge and comprehension of federal piping codes, state piping laws and rules where they want to pursue a profession, and fundamental plumbing system upkeep and repair, including plumbing system construction.

A person who wants to become a licensed as well as a certified plumber has to pass the required state pipes test. They should have finished a certificate course run through a training center or college.

They also should have finished an apprenticeship within plumbing systems or possess no less than as much experience working in piping as is required by the nation’s minimum requirement.

How is the Journeyman Plumber Test Structured?

Three isometric drawings for a total of 10 points for everyone, 80 to 100 evenly balanced questions with multiple choices make up the test.

The majority of the questions are going to be scenario-based, which means you will be required to make assumptions about a variety of variables and come to your own conclusion about the correct solution using the information you have and your understanding of the electrical code. Only trade topics normally appear on the journeyman plumber test.

How is the Journeyman Plumber Test Structured

The Following is a Typical Breakdown of the Trade Expertise Parts

  • Principles of General Theory and Plumbing.
  • Reading the plan and specifications.
  • Equipment, faucets, including fixture accessories.
  • Drainage techniques.
  • Septic system and sewage.
  • Systems for the supply and distribution of water.
  • Backflow Avoidance.
  • The pipe can be cut, joined, supported, and hung.
  • Fittings & Plumbing Repairs & Maintenance.
  • Piping for natural and medical gas.
  • Traps as well as interceptors.
  • Piping for the industry.
  • Wells, drip irrigation systems, and pools.
  • A solar power system.
  • Safety from fire.
  • Knowledge of basic plumbing codes.
  • OSHA Protection, Testing, and Equipment Use Guidelines.
  • Isometric illustrations.

The apprentice plumber’s license may be governed by contractors based on the state where you live. Anticipate seeing more questions on the test covering permits, legislation, and commerce if this happens to be the case. The tests frequently last between two and five hours.

What Knowledge and Skills are Tested on the Journeyman Plumber Test?

The Journeyman Plumber Exams is an internationally recognized examination that evaluates candidates for the Journeyman Plumber designation in the areas of skills and expertise in plumbing.

Topics, including plumbing theory, supplies and equipment, plumbing rules and legislation, and security procedures, are frequently included in exams.

A Journeyman Plumber Preparation Test is a model exam created to assist plumbers in getting ready for the actual Journeyman Plumber Certification. Multiple-choice questions covering a variety of subjects, including plumbing principles, substances, and instruments, plumbing regulations and legislation, and security procedures, are frequently included in the practice exam.

Candidates can evaluate their knowledge and determine what areas may require more practice or learning by completing a practice exam. You will be put through a series of more situation-based professional expertise and ability tests throughout the Journeyman Plumber Examination.

  • Ventilation is the hygienic movement of steam as well as gases.
  • Supports, along with Hangings, are components that assist in balancing the strain on a strong pipe.
  • Water distribution networks describe how water is delivered to devices as well as via pipes.
  • Backflow from control devices guards against backflow-related water contamination.
  • Plumbing equipment.
  • Appliances that “intercept” as well as “trap” grease, oily substances, and other pollutants are called interceptors as well as traps.
  • In addition, General Knowledge, as well as Regulations, cover every aspect of what is permitted and prohibited in the workplace.

How Hard is the Journeyman Plumber Test?

You must be aware that the response to the question, how difficult is the apprentice plumber check, depends on a number of various factors.

Its learning component is not perhaps the most difficult aspect of this particular exam, which is an issue. The difficult part is actually the psychological struggle you endure when studying and practicing for the test.

Although the testing process itself is not challenging, the preparation is challenging. Most aspiring plumbers wind up training while logging many hours. It’s possible that you’ll spend weeks and hours at night dealing with the difficulties on the field. As a result, it’s not exactly a piece of cake.

You will undoubtedly make some blunders while working as a newbie. But keep in mind that certain errors are significantly more expensive than alternatives. Nobody likes to pay to replace expensive items, but if you destroy anything, you’ll probably have to.

As a result, when you’re having difficulty with your job, discover a strategy to calm your tensions and improve your psychological condition. Maintaining your composure when studying, practicing, and taking exams is the most crucial thing.

Another thing to bear in mind is the fact that the test is often given in open book format, and the required score is typically about 70%. However, this might vary by state.

Tips for Passing the Journeyman Plumber Test

Tips for Passing the Journeyman Plumber Test

  • Consider applying for a plumbing degree. Obtain as much employment as possible in your state, or go to a vocational institution to earn a degree in plumbing.
  • Find out what is needed to take the journeyman test from your nation or municipality.
  • Use study resources for preparation.
  • To prepare for the real test, complete The Journeyman Plumber Sample Certification with the Fifty State Plumbers Exam Handbook.
  • Use an activity test as well as flashcards while studying with a companion and quiz each other.
  • Examine the plumbing codes in your area.
  • Get lots of rest in the evening prior to the plumbing test and spend the day preceding the test free from studying.
  • Recognize what you may and may not bring to the test. There are some open-book examinations.
  • Be on time for the plumber’s exam.

Check out the no-obligation journeyman plumbing practice exam provided by as your first step after studying. The entirety of the examination can thereafter be obtained by buying a few practice exams. The Journeyman Plumbing Sample Exam Kit is an excellent resource for journeyman plumbing practice tests. It will aid in your test preparation and provide solutions to over 300 problems.

What are the Consequences of Failing the Journeyman Plumber Test?

Overall Examination Result report will tell you if you succeeded or failed, detail the portion(s) of the test that you missed, and list your content-area abilities and areas of improvement.

If an applicant fails a test, they have one year from the day their application was approved to pass the test and repeat it; otherwise, they must reapply to the Board.

The Board has to be contacted in writing by candidates who have taken the test six times and failed to pass it before allowing them to take it again.

When a candidate fails a portion of a test, they only need to retake that portion of the test. To get a license, all applicants must, however, pass along each component of the test.

Watch this one,

Video Credits – TruePrep

You May Also Like

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *