How do You Bypass a Delta Touch Faucet Solenoid? Latest Guide
Due to its modern style and proper touch-activated function, Delta touch faucets were a preferred option for several homeowners. But occasionally, the faucet’s solenoid valve could break down, obstructing the flow of water or leading the faucet to turn on without warning. How do you bypass a Delta Touch Faucet Solenoid is a question you may ask if you find yourselves in this scenario.
Do not be alarmed; bypassing this solenoid valve would be a reasonably uncomplicated procedure that may be carried out in a few simple steps. In this post, we’ll show you the step-by-step process to bypass a Delta Touch Faucet Solenoid, allowing you to restore water flow quickly.
What are the Functions of a Delta Touch Faucet Plus a Solenoid Valve?
Dining or bathroom faucets with touch-activated technologies for on/off water control are known as Delta touch faucets. In order to regulate the flow of water inside a Delta touch faucet, a solenoid valve would be an electromechanical device.
What is the Mechanism of a Solenoid Valve on a Delta Touch Faucet?
In order to regulate the flow of water via the valve, a Delta touch faucet solenoid uses an electromagnet. A tiny electric coil, a metal plunger, as well as a valve that regulates water flow, may all be found within the solenoid valve, which is part of the faucet.
The metallic plunger moves whenever the touch-activated function is employed because an electric current travels through the coil, producing a magnetic field that moves the plunger. This valve, which controls whether or not water is allowed to flow, is attached to the plunge. Water flows through into the faucet when the valve opens; when it’s shut, water flow is obstructed.
Whenever you touch this controller, the electric signal is sent to the solenoid valve, which then responds by opening or closing the valve based on the message. In this manner, the solenoid valve regulates the supply, as well as the touch-activated function serves as a toggle for the solenoid.
Why May Some Contemplate Disabling the Solenoid on Such a Delta Touch Faucet?
There are several justifications for choosing to disable the solenoid valve on such a Delta touch faucet.
The solenoid valve will be most frequently to blame when a faucet abruptly turns on or stops working properly, blocking water flow. Until a new solenoid can be installed, bypassing your solenoid could restore water flow.
Other possible explanations include that the touch-activated function is not required or that the solenoid valve cannot be changed. It might be costly to replace a solenoid valve, especially if you need to hire a plumber to complete the task. If such a faucet’s functionality does not depend on the touch-activated function, bypassing its solenoid may be more economical.
How do you Bypass a Delta Touch Faucet Solenoid?
Based on the specific kind of faucet you own and your degree of familiarity with piping maintenance, there are a handful of ways to get around a Delta touch faucet solenoid.
Method 1: Use a jumper wire
Bypassing its valve, thus enabling water to circulate along through the faucet without first being regulated by that of the solenoid, this technique includes connecting two inputs of the solenoid valve with only a short length of wire.
In order to get around the solenoid, use this quick and simple solution. However, it will make the faucet’s touch-activated function inoperable. In other words, the water will keep flowing till you physically turn that off.
Method 2: The plug-bypass technique
There is a built-in bypassing plug included with certain Delta touch faucet types that may be used to bypass its solenoid valve. The solenoid is not required for water flow because the plug links the supply of water straight to the faucet nozzle.
Method 3: Change the solenoid
The solenoid valve must be replaced in order to get the touch function operating again if any of the fixes above are successful or the valve is broken. A replacement solenoid valve suitable for the particular model of the delta touch faucet is needed when changing the solenoid, which also calls for such plumbing expertise.
Step-by-step Guide to Bypass a Delta Touch Faucet Solenoid
There are a few simple actions you must do in order to bypass its solenoid valve on a Delta touch faucet.
Remember that the precise directions may change based on the faucet model. In order to use any technique, you must first turn off the water flow here to a faucet, replace the faucet handles, find the solenoid valve, and afterward proceed as directed.
- Dispatch the faucet’s handle. This is usually accomplished by taking out the set screw, holding the grip, or pulling off the ornamental cap covering the handle screws.
- You should be able to find the solenoid valve within the body of the faucet. It is a cylinder- or rectangle-shaped object with wires protruding from it.
- By carefully drawing the wires away from the connection or removing them from the control valve, you may remove them from the nozzle.
- Make a connection collectively or employ a jumper wire to bypass the solenoid. As a result, the faucet would be able to release water without the solenoid controlling it.
- To check if the water is flowing correctly, check the faucet. If so, put the faucet back together and restart the water flow.
- If you have a bypass plug, put it in according to the directions on the plug’s packaging and close the solenoid valve.
- Replace the solenoid with a replacement one appropriate for the type of Delta touch tap when it is broken, and all of the fixes above are successful.
It’s essential to keep in mind that bypassing this solenoid valve would stop the faucet’s touch-activated function, meaning the water will keep flowing till you physically shut that off. If you need more confidence in doing it, it’s advised that you get a licensed plumber for assistance.
FAQ
Q: Is it possible to harm my faucet by simply bypassing its solenoid valve?
A: Disabling the solenoid valve does not harm the faucet. On the other hand, when done incorrectly, it could harm the faucet’s cables or other parts. It is advised to adhere to the guidelines in the article, and if you need clarification, speak with a qualified plumber.
Q: If I bypass this solenoid valve, is it possible to utilize the touch-activated function?
A: Your faucet’s touch-activated function may be turned off by bypassing its solenoid valve. Till you physically shut the water off, this should keep flowing. You may bypass it using an alternative technique that supports this functionality intact, such as the bypass plug approach.
Q: What is the expected duration of the bypass?
A: The durability of the bypass is based on the caliber of the materials and the quality. If installed correctly, the bypass ought to function till a solenoid valve is changed, or the issue is resolved. If the wires aren’t securely linked, or the jumper wire seems poor quality, the bypass may have to be performed if it degrades over time.
Q: Can I handle this repair alone, or is it necessary to hire a plumber?
A person with a rudimentary understanding of plumbing can bypass this solenoid valve since it is very straightforward. Yet, it’s better to seek the help of a qualified plumber if you feel you need more confidence handling this repair. Additionally, it is advised to visit a specialist if you need clarification on the source of the issue or the condition of the faucet.
“We are pretty much sure that the below-mentioned video will help your task.”
Video Credits: Masco Canada
More on Plumbersdiary.com:
