{"id":852,"date":"2023-05-16T04:47:29","date_gmt":"2023-05-16T04:47:29","guid":{"rendered":"https:\/\/plumbersdiary.com\/?p=852"},"modified":"2023-05-16T04:48:04","modified_gmt":"2023-05-16T04:48:04","slug":"leaning-water-heater","status":"publish","type":"post","link":"https:\/\/plumbersdiary.com\/leaning-water-heater\/","title":{"rendered":"Leaning Water Heater – Easy Steps for a Sparkling Clean Tank!"},"content":{"rendered":"

Although it is not a popular tourist destination, a leaning water heater can be dangerous. The hardwood platform degrades whenever a water heater bursts and fluid seeps through, particularly when this problem persists for a long time. There have been several reports in recent months claiming that leaning water heaters are dangerous.<\/span><\/p>\n

The reason that causes the water heater to tilt and how to spot one are both covered in this article. Learn about the possible hazards and repairs for a leaning water heater.<\/span><\/p>\n

What Causes a Water Heater to Lean?<\/strong><\/span><\/h2>\n

There are actually two main reasons for the water heater to tilt if you notice it.<\/span><\/p>\n

The platform suffered damage from water as well as is not as sturdy as it once was. This may occur if a water heater is elderly and has seen a lot of usages or if you recently upgraded to a larger one.<\/span><\/p>\n

A larger heating element being placed on a platform intended for smaller ones is another reason for this.<\/span><\/p>\n

The platform may weaken and becomes unstable as a result. The water heater can start to lean if this occurs.<\/span><\/p>\n

Since they are supported by a plywood and OSB device, water heaters typically lean. Any liquid heater leaks saturate the wood underneath, weakening it over time and causing it to droop.<\/span><\/p>\n

The moisture leakage propagating from a nearby air conditioner on the exact same platform might also be the root of the wet base problem.<\/span><\/p>\n

Don’t forget to inspect the water pipes while inspecting the water heater. Leaning heaters may place excessive strain on the water’s lines if the links are hard-piped. There is usually less stress provided the pool heaters supply cables and connectors are flexible tubing.<\/span><\/p>\n

\"How<\/p>\n

How to Recognize a Leaning Water Heater?<\/strong><\/span><\/h2>\n

A 50-gallon hot water heater weighs roughly 570 lbs, which includes roughly 150 lbs with the container itself and 420 pounds for the water. As a result of all these pounds, the structure may droop, or the water heater’s feet may dig into the plasterboard or wood, losing their level. The hot water heater would then slant instead of standing upright.<\/span><\/p>\n

Checking for signs of dampness and mold in the region merely makes sense, especially because moisture corrosion of the hot water heater base constitutes one of the main causes of a leaning water tank. Dark pigmentation, including moisture spots on the exterior wall or platform, can be a red flag.<\/span><\/p>\n

A smelly or moldy smell can be another red flag. If you find suspected mold proof in a wall region, try looking for it on the opposite side of the partition if at all feasible. And, if the standing water heater occupies the second story, look beneath the ceiling where it is located.<\/span><\/p>\n

If mold or mildew is found in the wall and is suspected, it could have also infiltrated any insulation there. Individuals frequently take care of minor dampness and mold issues by themselves, but occasionally they’ll contact a professional to look into and address any issues.<\/span><\/p>\n

What are the Potential Risks of a Leaning Water Heater?<\/strong><\/span><\/h2>\n

To prevent mishaps, it is crucial to be aware of the possible risks posed by a leaning water heater. The following are only a few of the harmful outcomes that might result from a slanted tank.<\/span><\/p>\n